Inspection Report Guide for Titanium Parts
Neutral buyer guide to inspection reports for titanium parts and what to require.
Quick Answer
Agree what an inspection report must contain: measured dimensions against tolerances, material and lot reference, equipment used, inspector sign-off, and any non-conformances — and how it is delivered with the parts.
Checklist
- Define the measurements and tolerances to be reported
- Confirm the inspection method and equipment
- Require material and lot reference on the report
- Require inspector sign-off and date
- Agree on handling and reporting of non-conformances
Reports are evidence
An inspection report is the buyer’s evidence of conformity. Specify its content up front rather than after delivery.
KEEP THE GAP
Report formats and requirements vary by industry and quality system. titanium.blog does not set inspection requirements.